Pawl Key Test

Which degrees of freedom are constrained by the primary datum feature?

Which datum feature is referenced as secondary in the position feature control frame?

Which degrees of freedom are constrained by the tertiary datum feature?

What is the maximum size tolerance on the 1.350 diameter?

What is the MMC size of the 1.350 diameter?

What does rule#1 (envelope principle) on the 1.350 diameter require:

How much perpendicularity tolerance is allowed if the 1.350 dimeter is produced at LMC size?

What is the name of the symbol in front of the 2.500 diameter?

What type of feature is datum feature C?

What is the tolerance zone shape for the position tolerance on the .500 feature?

The slot’s position tolerance applies:

How much position tolerance is allowed if the two holes are produced at .375 size?

What is the max possible distance between the axes of the two holes if they are produced at MMC size?

What is the max height of the part?

What is the max flatness variation allowed on the top surface?

What type of geometric tolerance is parallelism?

Do the .400 and 4.550 dimensions have tolerance?

What is the max width of the .400 slot?

What is the max possible distance of the top edge relative to the ABC datum reference frame?

What is the max possible length of the part?